Six and a half inches... yes, I really said six and a half inches of drunkard's path mini-ness! That's what I've been working on these days, and I wanted to share how I made such a tiny little drunkard's path block WITHOUT ANY CURVED PIECING!
Wait just a minute... I thought that a drunkard's path block is done using a curved piecing technique? Well, yes, traditionally, but if you intend to work with individual blocks that are only 2 inches (5 cm), then you have to think a little outside the box. Curved piecing is hard enough to do, but if you want to super shrink your block it is nearly impossible, so an alternative method is an absolute must, and I'll show you just how I did it using the reverse applique method:
So to start out, grab a couple of supplies that you hopefully already have in your sewing room: Compass, freezer paper, fabric, glue stick, scissors, and invisible thread. It's time for a little grade school 101 cutting. For my circle, I measured out 1 1/4 inches (3,15 cm), which will give me a 2 1/2 inch (6,30cm) finished circle. Trace onto the mat side of your freezer paper, and cut out the inner circle.
Iron the circle, glossy side down, to the wrong side of a 5 inch (12,5 cm) fabric square, making sure that the inner circle is centered. Cut out the center leaving a 1/4 inch (6mm) seam allowance. Once the inner circle is cut out, then cut slits along the seam allowance about 1/4 inch (6mm) apart.
Just like I've shared in some of my previous freezer paper applique tutorials, run a small line of glue around the circles edge, and using small scissors or other turning tool, wrap the fabric notches to the back side of the circle.
Once your circle is completed, stitch the circle onto a background fabric of your choice as close the edge of the circle as possible. I used invisible thread for two reasons: It does not show up very easily, and I don't have to change out threads with each new block.
Remove the freezer paper from the back side and iron flat. Once you have finished the circle, here comes the part that is a little bit scary. Measure out your center and cut the circle into four equal quarters. Next, trim to 2 inch (5 cm) blocks.
Make as many as you would like and then you are now ready to assemble the blocks into your favorite drunkard's path block. I was inspired by the Arabian Nigihts Quilt as seen in Angela Pingel's book, A Quilter's Mixology: Shaking Up Curved Piecing: 16 Projects Using the Drunkard's Path Block.
Have you tried traditional curved piecing methods? What was your take on it... love it and enjoy the challenge or was is frustrating and annoying?
Linking up this week to WIP Wednesday and Let's Bee Social.